How To Prepare The Roofing In Calgary

Hiring a professional roofing installer is costly. If you want to save on money and time, doing the installation of new shingles by yourself will allow you to achieve considerable savings. Doing your roof shingles makes your house in good condition and keeps your family protected and safe from harmful elements.

There are several steps that will guide you in installing your roofing in Calgary that are easy to follow. With these steps, you will learn the preparation of the roof like a professional installer of roofing in Calgary.

Preparation of the Roof

  1. Get the exact pieces of shingles that are needed. It usually needs 3 bundles of the materials to cover an area of 100 square feet. Measure the width and length of every part of the roof and multiply them to get the area. Add all areas of every section and divide them by 100 to get the right number of pieces of squares. Then multiply it by 3 to arrive at the pieces of bundles you need to buy.
  2. Measure the shingle’s length while it lies on the roof. The lowest row must hang over the roof’s edge.
  3. Remove the old flashing and shingles. Start at the farthest part from the container of trash and utilize a roofing shovel or a garden fork to pull them.
  4. Clean roof – sweep the roof and clean it as much as you can. Return loose boards and examine the sheathing for damages.
  5. Mount new flashing and underlayment – put asphalt on the floor, waterproof underlayment, and felt paper.
  6. Choose the starter course you are going to use – choose narrow and tab-less shingles for starters if you have some or you will cut the shingles by yourself.
  7. Use chalk lines as your guide – make a marking guideline starting 7 inches from the lowest edge of the roof. Mark from left to the right edge to see the chalk line.

Doing the preparation of the roofing yourself maybe a difficult task. However, if you have the ability to do it, it should be an easy thing to do. It needs patience and good thinking.

Comments are disabled